Quick setup
1.Power on the computer and monitor.
2.Start the operating system.
3.Insert the
4.From the Main Menu, click on the options you would like to perform and follow the directions on the screen.
Troubleshooting
Problems | Check items |
• No video | • Check whether the power of screen is on or not. |
•The power LED didn’t lit. • Ensure the power cord is connected to screen properly.
•Ensure the power supply is normally in the outlet by tester.
• | No video | • Ensure the computer is not in the power save mode. | |
• | The power LED is in the |
| (Move mouse or hit any key to wake up the computer) |
| color of orange. | • | Ensure the computer or the equipment of video source is on. |
|
| • | Ensure the video signal cable is connected properly. |
Warning: To reduce the risk of electric shock or damage to your equipment:
1.Do not disable the power
2.Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
3.Disconnect power from the monitor by unplugging the power cord from the electrical outlet.
-5 -