Hanns.G JC199APB manual First Setup, Quick Installation, Connect video cable D-Sub cable

Page 6

First Setup

First Setup

Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories :

Power cable.

D-Sub cable (15 pin) Audio cable.

User guide.

Quick Installation

1.Connect video cable (D-Sub cable)

Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor.

2.Connect power cord

Connect the power cord to a properly grounded AC outlet, then to the monitor.

3.Power-ON computer and monitor

Power-ON the computer, then Power-ON the monitor.

4.Windows users: Setting the Timing Mode (Resolution and Refresh Rate)

Example: 1280 x 1024 @ 60 Hz

Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop Area”. Set the resolution.

Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.

Example:

Power cable

D-Sub cable

2

Image 6

Contents Energy CongratulationsErgonomics EmissionsTel Europe IrelandContact Person Ms. McGrath Clodagh FaxOperation Instructions FCC WarningContent Safety Precautions WARNINGS2. Connect power cord First SetupQuick Installation 3. Power-ON computer and monitorFront View of the Product Rear View of the Product➐ ➑ ➒ Using On Screen Display OSD Functions Main MenuShort Cuts Function from the buttons Audio Menu To adjust the audio functions Sharpness To adjust the clarity of a non-SXGA 1280x1024 signal withHorizontal OSD Position To horizontally adjust the OSD position Volume To adjust the volume of speaker outputSupporting Timing Modes Technical Information Safety Tips Care and MaintenanceTroubleshooting No powerWrong or abnormal colors