Hanns.G HI221 Error Message & Possible Solutions, § Cable not Connected, § Input not Support

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTIONS

§CABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

§INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE: (Analog / Digital mode)

MODE	RESOLUTION	HORIZONTAL	VERTICAL
		FREQUENCY (KHz)	FREQUENCY (Hz)
1	640×480 @60Hz	31.469	59.94
2	640×480 @67Hz	35	66.667
3	640×480 @72Hz	37.861	72.809
4	640×480 @75Hz	37.5	75
5	720×400@70Hz	31.469	70.087
6	800×600 @56Hz	35.156	56.25
7	800×600 @60Hz	37.879	60.317
8	800×600 @72Hz	48.077	72.188
9	800×600 @75Hz	46.875	75
10	832×624 @74.6Hz	49.725	74.5
11	1024×768 @60Hz	48.363	60.004
12	1024×768 @70Hz	56.476	70.069
13	1024×768 @75Hz	60.023	75.029
14	1152×864 @75Hz	67.5	75
15	1152×870 @75Hz	68.681	75.062
16	1280×960 @60Hz	60	60
17	1280×1024 @60Hz	63.981	60.02
18	1280×1024 @75Hz	79.976	75.025
19	1400×1050@60Hz	64.744	59.948
20	1400×1050@75Hz	65.317	59.978
21	1600×1200@60Hz	75.00	60.00
*22	1600×1200@75Hz	93.750	75.00
23	1680×1050@60Hz	65.290	59.954
*24	1680×1050@75Hz	82.306	74.892

***DVI input source: Does not support modes 22,24. 19

PDF created with pdfFactory Pro trial version www.pdffactory.com