Hanns.G Monitor Manual for Easy Setup and Connection
Page 9

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the procedure below.

1.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect one end of the 24-pin DVI-D cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s DVI-D port.

3.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.

5.Turn on your monitor and computer.

Figure.2. Connecting to a PC

1.

VGA Input

2.

DVI-D Input (optional)

3.

Audio Input

4.

Power AC Input

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USER’S Manual Inch Wide Screen TFT LCD MonitorCanada User’s ManualRecycling Information Table of Contents Precautions Safety NoticeSpecial Notes on LCD Monitors Features Checking the Contents of the PackageBefore YOU Operate the Monitor Power Installation InstructionsMaking Connections Connecting to a PCRotating the Monitor Adjusting the Viewing AngleScreen Height adjustment Screen Height AdjustmentOperating Instructions General InstructionsControl Panel Buttons Menu / Enter Front Panel ControlFunction Description HOW to Adjust a SettingOSD Other Setting Plug and Play Plug & Play DDC2B FeatureFor General Problems Technical Support FAQProblem & Question Possible Solution BlueError Message & Possible Solutions Cable not Connected Timing ModeInput not Support Appendix SpecificationsVesa DDC2BTM EPA Energy
Top Page Image Contents