Behringer CE1000P Troubleshooting, Specifications, Protecting your speakers, Signal distorted

Page 7

BUSINESS ENVIRONMENT SPEAKERS CE1000P

Also, you should keep in mind the impedance of your amplifier in order to guarantee optimal power delivery. The CE1000P’s impedance is 8 Ω. Use an amp whose power rating corresponds to an impedance of 8 Ω.

2.4 Protecting your speakers

sAlways turn down the volume on your amp before switching it on or off.

sWhen powering your equipment up/down, the amp should always be the last one to be powered up and the first one to be powered down. This way, you avoid switch-on thumps that occur when you turn connected equipment on or off.

sAlways make sure your audio signal level is optimally set. Avoid overdriving your amp.

sDo not push your loudspeakers beyond their physical limitations. Even though your CE1000P has sufficient power overhead, you can still damage it if you drive it too much or crank the volume all the way up for longer periods of time.

sUse a limiter to restrict the output signal level. Place the limiter between the mixing console and the power amp. For this purpose, our proven AUTOCOM PRO-XL MDX1600, COMPOSER PRO-XL MDX2600 and MULTICOM PRO-XL MDX4600 compressors offer an outstanding solution. All models can be used as a limiter: the audio signal doesn’t overdrive any more, and unpleasant “peaks” are effectively avoided.

3.TROUBLESHOOTING

3.1No signal when loudspeaker is connected

sMake sure that your mixing console is indeed carrying a signal (is the master fader raised? Are channels active?) and that the gain control on your amp is turned up.

sWhen using a crossover, make sure that the relevant channels are active.

sCheck if the cable connection is interrupted/damaged somewhere in your setup.

sTo test your configuration, connect another amp. If you now get a signal, the power amp is the culprit.

sTo test your configuration, connect another speaker. If you now get a signal, the fault lies within the speaker.

3.2Signal distorted

sMake sure that all signals on the mixing console have been set to optimal levels in order to avoid distortion.

sMake sure that the power amp channels are not overdriving. If so, turn the gain control down a little. However, it could also be the case that your power amp doesn’t have enough power headroom, so that the required volume can not be generated without starting to distort.

sMake sure that the level of the signal getting into the speakers is not too high, causing distortion.

sCheck your EQ settings. Excessively increasing the frequencies can result in distortion.

sIf distortion is still occurring despite everything you have tried to eliminate it, try connecting a different power amp. If you no longer hear distortion, its cause was with the power amp.

sAs a test, connect another speaker. If you no longer hear distortion, its cause was with the loudspeaker (perhaps a defective loudspeaker).

sCheck if the cable connection is interrupted/defective somewhere along the path.

3.3Poor sound characteristics (treble signal too low/bass signal too low)

sCheck the EQ settings on your mixing console or on an external EQ, if applicable.

sMake sure that the tweeters on your loudspeakers are positioned at the same height as the ears of the people in the audience. If not, please modify the speaker position.

sMake sure your loudspeaker cables are properly wired. Incorrect wiring may result in phase cancellations, which in turn may create frequency incursions.

sCheck if large objects are placed in front of the loudspeakers. They too can negatively influence sound dispersion.

sCheck the sound quality of the input signal by listening to it on a set of headphones.

sAlso see the instructions in the chapters 3.1 and 3.2.

4. SPECIFICATIONS

CONNECTORS

 

Type

Spring connectors

SYSTEM SPECIFICATIONS

 

Power rating (peak program)

300 watts

Impedance

8 Ω

Frequency response

50 Hz to 20 kHz

Sound pressure level

91 dB (1 W/1 m)

COMPONENTS

 

Tweeter

25 mm titanium

Woofer

8"

DIMENSIONS/WEIGHT

 

Dimensions (H x W x D)

17 1/2" x 10 2/3" x 8 2/3"

 

(445 mm x 270 mm x 220 mm)

Weight

22 1/4 lbs. (10.1kg)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

4. SPECIFICATIONS

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Version 1.0 June CE1000PBusiness Environment Speakers CE1000P Important Safety Instructions Conceived and designed by Behringer Germany Ultra-flexible wall-mount brackets includedForeword Table of ContentsIntroduction InstallationSignal distorted TroubleshootingSpecifications No signal when loudspeaker is connectedWarranty

CE1000P specifications

The Behringer CE1000P represents a versatile power amplifier designed for professional audio applications. Renowned for its impressive performance, it caters to both live sound environments and installed audio systems. One of its standout features is its high output power, providing 1000 watts of power per channel at 4 ohms, making it capable of driving speakers efficiently and delivering powerful sound even in large venues.

The CE1000P incorporates advanced Class-H technology, which distinguishes it from traditional amplifiers. This technology allows for improved efficiency, reducing power consumption while maximizing output. As a result, users can expect lower operating costs and less heat generation, which is particularly beneficial in extended use scenarios. The amplifier also features a compact, lightweight design, making it easier to transport and install compared to many bulkier models in its category.

Built-in sophisticated protection circuitry ensures reliability and safety. This includes features like overcurrent, thermal, and short-circuit protection, preventing potential damage to both the amplifier and connected equipment. Additionally, the CE1000P includes a comprehensive signal processing section, providing selectable high-pass and low-pass filters that allow users to fine-tune performance according to specific requirements.

Connectivity is also a focus with the CE1000P, as it offers multiple input and output options. The balanced XLR inputs ensure compatibility with various audio sources, while the Speakon and binding post outputs allow for flexibility in connecting to different speaker systems. The unit’s front panel includes LED indicators for monitoring levels and status, enhancing usability during performance.

In terms of sound quality, the CE1000P excels with an ultra-wide frequency response and low total harmonic distortion, ensuring that audio fidelity remains intact across all types of performance. Users appreciate the amplifier's ability to handle dynamic sound peaks without sacrificing clarity, making it suitable for a wide range of applications, from live concerts to corporate events.

Overall, the Behringer CE1000P stands out as a reliable and efficient power amplifier, merging powerful output with advanced technologies. With its robust construction and user-friendly features, it is an excellent choice for audio professionals seeking performance, reliability, and versatility at an accessible price point.
Top Page Image Contents