Focal Solo6 Be, Sub6, Twin6 Be user manual Unpacking, Preliminary recommendations, Warranty

Page 3

3

 

INTRODUCTION

Thank you for choosing the FOCAL Solo6 Be - Sub 6 - and/or Twin6 Be.

The Solo6,Twin6 Be, and the Sub6 are world class Professional Monitoring Systems.

They have been designed to offer superior imaging, outstanding precision and extended frequency range, in a compact format suitable for near field monitoring.

Unpacking

In addition to one loudspeaker and a user manual (such as this one), each Solo6 or Twin6 carton should contain:

A power cord.

A guarantee card.

A protection grille for the Beryllium tweeter (you are advised to remove it before listening to the speakers).

A plastic bag containing an information note “Beryllium inverted dome tweeter”, and some adhesive tape to affix on the tweeter in the unlikely event of the dome being damaged.

In addition to one subwoofer and a user manual each Sub6 carton include:

A power cord.

A guarantee card.

A grille protecting the drive unit (which it is advisable to remove whenever possible).

Please check that none of these items are missing, and remove all accessories from the carton.

To remove the loudspeaker from its carton without damage, open the end flaps fully and bend them right back. Then remove the upper cushion and lift the loudspeaker out gently. Inspect the speaker for signs of any possible damage.

In the unlikely event of this having occurred please inform the carrier and supplier. It is a good practice to keep the packaging in case of future transportation.

Preliminary recommendations

We would like to give a word of warning about the high sound pressure levels that can be generated by these loudspeakers, especially in a 5.1 configuration. Because of their low levels of distortion, and the minimal fatigue incurred by the user, it is not always obvious to realise the actual sound pressure level while working.

Please bear in mind that exposure to excessive levels over a sustained period of time may lead to permanent hearing loss.

Warranty

These products are guaranteed against defects in components and workmanship only, for a period of one year from the date of shipment to the end user. During the warranty period Focal will, at their discretion, either repair or replace products which prove to be defective, provided that the product is returned, shipping prepaid, to an authorised Focal service facility.

Defects caused by unauthorised modifications, accident, negligence or any misuse are not covered by this warranty. For further information please contact your dealer or the distributor in your country.

Image 3
Contents Sub6 Twin6 Be Solo6 Be Solo6 Be Twin6 Be Sub6Solo6 Be / Twin6 Be / Sub6 Warranty UnpackingPreliminary recommendations Right Phase control Level control Lo Pass control Mains voltage Audio connections Sub6 fig. G Stereo + Sub setup 2.1 orMultichannel configuration Sub6Positioning Solo6 Be/Twin6 Be/Sub6 Controls RunningSub6 controls fig. G Using the SystemAll specifications are subject to change Specifications Solo6 BeSpecifications Twin6 Be Specifications Sub6 Précautions d’utilisation Manuel utilisateurRecommandations DéballageGarantie Manuel Utilisateur Manuel Utilisateur Connexions spécifiques au Sub 6 fig. G Présentation DES ProduitsAlimentation secteur Connexions d’entrées audioPositionnement Rodage UtilisationIndicateur Power Contrôles spécifiques au Sub6 fig. G’activation du Bypass provoquera Performances Specifications Twin6 Be Section Électronique Specifications Sub6Tel 33 4 77 43 57 00 Fax 00 33 4 77 43 57