Installation, Specifications | Behringer BB210 specs

ULTRABASS BB210

4. INSTALLATION

4.1 Speaker connector

When combining several speakers/cabinets, you should bear in mind the resulting overall impedance. Here are some brief explanations about different kinds of connections:

Serial connection: The individual impedance values of the connected speakers are added up. If two 4-Ohm speakers are connected to one another, there is an overall impedance value of 8 Ohms.

Parallel connection: If speaker/cabinets with identical impedance values are connected in parallel, the overall nominal impedance is reversely proportional to the number of speakers, e.g. if you connect two speakers/cabinets, the nominal impedance is halved; if you connect three speakers/cabinets, the nominal impedance is one third of the individual speakers’ impedance; with four speakers, it’s one quarter, and so on. For example, this way you can turn two 8-Ohm systems into one 4-Ohm system.

If four or more speakers/cabinets need to be connected, this can be done using a serial parallel connection. With four speakers with an impedance value of 4 Ohms each, the resulting overall impedance does not change.

+Whenever possible, try to use thick and short speaker cables to minimize power loss. Don’t lay output cables near input cables.

Wiring options for loudspeakers are additionally explained in the following illustrations and tables.

Fig. 4.1: Different types of connections

Number of speakers		2x	2x	2x	4x	4x	4x
Impedance of		4	8	16	4	8	16
each speaker (Ω)		4	8	16	4	8	16
each speaker (Ω)
Resulting impedance with		2	4	8	1	2	4
parallel connection (Ω )		2	4	8	1	2	4
parallel connection (Ω )
Resulting impedance with		8	16	32	16	32	64
serial connection (Ω )		8	16	32	16	32	64
serial connection (Ω )
Resulting impedance with		-	-	-	4	8	16
serial parallel connection (Ω	)	-	-	-	4	8	16
serial parallel connection (Ω	)

Table 4.1: Speaker wiring options and resulting impedance

+Please note that if the LINK connector is utilized, the BA and BB series bass cabinets only support parallel connections.

4.2 Audio connections

Fig. 4.2: Professional speaker connector with polarity allocation

Fig. 4.3: 1/4" TS connector

5. SPECIFICATIONS

SPEAKERS
High-power bass speakers	2 x 10" BUGERATM
Sensitivity	97 dB @ 1 W / 1 m
Impedance	8 Ohm
Frequency response	40 Hz - 16 kHz
Power (RMS / Music)	600 W
Tweeter	1" tweeter driver
SPEAKER CONNECTIONS
Input/Link	2 professional speaker
	connectors, compatible with
	NEUTRIK® SPEAKON® (wired
	in parallel) as well as one1/4" TS
	connector
DIMENSIONS/WEIGHT
Dimensions (H x W x D)	655 mm x 500 mm x 365 mm
	(25 4/5" x 19 7/10" x 14 2/5")
Weight	ca. 28.5 kg (62.8 lb)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

8	5. SPECIFICATIONS

BB210 specifications

The Behringer BB210 is a powerful and versatile bass cabinet designed for musicians who prioritize sound quality and performance in their live and studio setups. With its robust construction and innovative technologies, this cabinet is an essential tool for bass players seeking to deliver rich and dynamic tones.

One of the standout features of the BB210 is its dual 10-inch low-frequency drivers, which provide exceptional sound reproduction across the bass spectrum. These drivers are specifically designed to handle high power levels, allowing musicians to play at loud volumes without compromising tonal integrity. The cabinet's 400-watt power handling capacity ensures that it can handle even the most demanding performances with ease.

The BB210 incorporates a frequency response range that extends from 45 Hz to 18 kHz, enabling it to deliver deep, punchy low frequencies alongside crisp, articulate highs. This wide frequency range ensures that every note played is heard clearly, whether it's a deep groove or a high melodic line. Additionally, the cabinet's impedance rating of 8 ohms makes it compatible with a wide range of amplifiers, further enhancing its versatility.

An essential part of the BB210's design is its lightweight construction. Weighing in at just under 50 pounds, this cabinet is easy to transport and set up at gigs. The durable plywood enclosure not only contributes to the BB210's lightweight nature but also plays a significant role in reducing unwanted resonance and improving overall sound quality.

For connectivity, the BB210 is equipped with dual Speakon and 1/4-inch jack inputs, allowing for easy integration with various amplifiers and sound systems. The cabinet's rugged design features a grille that protects the speakers from damage during transport and performance, making it a reliable choice for active musicians.

In terms of aesthetic appeal, the BB210 boasts a sleek, professional look that fits well in any performance environment. Its classic black finish and clean lines present an inviting yet robust appearance.

Overall, the Behringer BB210 is a remarkable bass cabinet that combines outstanding sound quality, innovative features, and lightweight portability. Whether on stage or in the studio, this cabinet is engineered to meet the demands of modern bass players, offering a powerful solution for achieving exceptional sound.