Fender Power Stage 100 owner manual Simple Monitor SET UP

Page 8

SIMPLE MONITOR SET UP

1.Connect your microphone to the Mic 1 IN.

2.Next, connect a cord from the Mic 1 out jack to your main mixing console. This is a mic level signal.

3.Your PowerStage 100 monitor is a dry signal. Any reverb or other signal processing heard through the main P.A. will NOT be heard in the PowerStage 100.

4.Remember, turning up the Mic 1 Volume will NOT affect the output of the main P.A. system.

Image 8

Contents Powered Monitors Page Powerstage IntroductionControl Panel Functions Power Section Input Panel FunctionsWiring and Connections Setting UP the Powerstage Grounding and Hums Troubleshooting Carpet Covering CareSimple Monitor SET UP Full MIX Monitor SET UP Full Monitor with AN Instrument Mini PA SET UP a ONE Person Band Specifications Designation Type Part Number