shake foundations with their weight and visceral impact. Mid and high frequencies will bloom with sweet, non-glaring ease while imaging improves dramatically, all the while remaining true to your system’s inherent virtues.
Installation:
Unpacking
Before unpacking your unit, inspect the carton for any obvious severe damage to the box and internal protective materials. If internal damage is likely, contact the carrier who delivered the unit before proceeding with unpacking. If, after unpacking, shipping damage is evident, contact the carrier. Save all shipping and packing materials. You may need them if you should ever have to return the unit to the factory for servicing.
The box should contain the Elite-20 PF unit, detachable AC cord, rack mount kit, owner’s manual, and warranty registration card. If anything is missing, please contact Furman Customer Service. Fill out and return your warranty registration card. Registration is recommended because it can be used to establish whether the unit is within the warranty period should your original ownership documents be lost, and it assists us in informing you about upgrades or other vital information.
Safety Information - Warnings
Please read and observe all of the safety and operating instructions before the Elite-15 PF is operated. Retain these instructions for future reference.
•Do not disassemble or modify in any way. No user-serviceable parts inside
•Keep away from moisture and avoid excessive
humidity
•Do not allow liquids or foreign objects to enter the unit
The Elite-20 PF should be serviced by qualified service personnel when:
•The power supply cord or plug has been frayed or cut.
•Objects have fallen or liquid has spilled into the unit.
•The Elite-20 PF has been exposed to rain or other moisture.
•The Elite-20 PF does not appear to operate normally, or exhibits a marked change in performance.
•The Elite-20 PF has been dropped, or the enclosure damaged.
The Elite-20 PF requires that a safety ground be present for proper operation. Any attempt to operate the Elite-20 PF without a safety ground is considered improper operation and could invalidate the warranty.
Power Source
The power source to which the Elite-20 PF is connected should be adequate for use at 20 Amps. The Elite-20 PF will operate with a 15 Amp service outlet; however, nuisance tripping at the circuit breaker panel may result if the systems continuous current draw exceeds 15 Amps.
Placement
The Elite-20 PF is manufactured with four rubber feet for placement on any table, cabinet, shelf, or floor. These rubber feet may be easily removed with a standard Philips screw driver when rack mounting adjacent to other
