![](/images/new-backgrounds/1194084/19408467x1.webp)
nForce 750i SLI Motherboard
Integrated Peripherals Menu
Select Integrated Peripherals from the CMOS Setup Utility menu and press Enter to display the Integrated Peripherals menu.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
IDE Function Setup | [Press Enter] |
RAID Cofig | [Press Enter] |
OnChip USB | [V1.1+V2.0] |
USB Keyboard/Storage Support | [Enabled] |
USB Mouse Support | [Disabled] |
USB Park Mode | [Enabled] |
USB TD Reads | [ISO Queue] |
USB Periodic Data Reads | [ISO Queue] |
USB Asyn Data Reads | |
HD Audio | [Auto] |
MAC Lan | [Auto] |
MAC Media Interface | [Pin Strap] |
IEEE1394 controller | [Auto] |
IDE HDD Black Mode | [Enabled] |
Onboard FDC Controller | [Enabled] |
Onbaord Serial Port 1 | [3F8/IRQ4] |
Item Help
Main Level
:Move Enter:Select | F10:Save ESC:Exit F1:General Help |
F5: Previous Values | F7:Defaults |
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
OnChip IDE Channel0 | [Enabled] |
Primary Master PIO | [Auto] |
Primary Slave PIO | [Auto] |
Primary Master UDMA | [Auto] |
Primary Slave UDMA | [Auto] |
IDE DMA transfer access | [Enabled] |
[All Enabled] | |
IDE Prefetch Mode | [Enabled] |
|
|
OnChip IDE Channel0
Use this function to enable or disable the onchip IDE Channel0. When disabled, the Primary Master/Slave functions are changed to Auto and cannot be changed.
Primary Master/Slave PIO
When OnChip IDE Channel0 is set to [Enabled], you can select a mode for the primary Master and Slave PIO. Select from Auto, or Mode 1 through Mode 4.
Primary Master/Slave UDMA
When OnChip IDE Channel0 is set to [Enabled], you can disable the primary Master and Slave UDMA or set it to [Auto].