Envision Peripherals LCD manual Troubleshooting, Blank Screen, Display Problems

Page 10

TROUBLESHOOTING

Blank Screen

Power indicator is off

Make sure the power cable and the power adapter are connected properly (see section “Connecting”).

Make sure that the monitor was turned on using the power switch (see section “Startup”).

Power indicator lights orange

A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse.

“Check signal cable”message

Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?

Is the PC turned on (see your PC’s documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom

If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter “Basic Setup”, section “Auto Image Adjustment”.

Image flickers or is shaky

Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows®9x/ME/2000/NT/XP consult the “Configuration” section.

Image is blurred

Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Brightness/Contrast”).

Check the resolution setting (see “Other” functions in the “OSD Menu Functions” section).

Color problems

If the colors are off (e.g. white is not really displayed as white, etc.), you should adjust the color temperature (see “Color” function in section “OSD Menu Functions”).

English

9

Image 10
Contents Page Table of Contents PrecautionsCaring for Your LCD Monitor Wall MountingConnecting UnpackingBasic Setup StartupImage Settings Using the OSD Menu Monitor featuresBrightness/Contrast OSD Menu FunctionsImage Control OSD Setup ColorAdvanced InformationDisplay Problems TroubleshootingBlank Screen Technical Specifications