Troubleshooting
Symptom |
|
|
|
| Check Items | |||
|
|
|
|
|
|
|
|
|
1.No picture | 1. Check if the monitor is turned on (press the button |
|
|
| again). | |||
|
|
| ||||||
|
|
| ||||||
2.LED indicator (at the right side of the | 2. Check if the power cord is properly connected to the monitor and power outlet. | |||||||
monitor) is not lit | 3 | .Check if there is electricity coming from the power outlet (use another device to check for power). | ||||||
|
|
|
|
|
|
| ||
1.No picture | 1 | Check if your computer is turned on. |
|
|
|
| ||
2.LED indicator (at the right side of the | 2 | Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard | ||||||
monitor) is orange |
| to wake up the computer). |
|
|
|
| ||
|
| 3 | Check if the video signal cable is properly connected to the monitor and computer. | |||||
|
|
|
|
|
|
| ||
1.Picture shows “ NO SIGNAL INPUT ” | 1 | Check if your computer is turned on. |
|
|
|
| ||
|
| 2 | Check if the video signal cable is properly connected to the monitor and computer. | |||||
|
|
|
| |||||
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly. | ||||||||
|
|
|
|
|
| |||
1.Picture not clear | 1. Press the | buttons simultaneously to activate the Auto Adjustment function | ||||||
|
| 2 | .Check if the video signal cable is properly connected to the monitor and computer. | |||||
3.Adjust the screen resolution and refresh rate of your computer to WXGA (resolution: 1440*900, refresh rate: 60Hz) for the best performance
- 6 -