Behringer B208D, B215D, B212D, B210D Instant PA system, Stereo music system, Marvelous monitoring

B215D/B212D/

B210D/B208D

15"/12"/10"/8" 2-Way Active PA Speaker

When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply’s capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn’t require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles.

Instant PA system

With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It’s just that easy. And

if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers.

Ergonomically shaped carry handles on each side of enclosure for easy transport of system. Two handles on B212D/ B215D, one on B210D.

Impact resistant, molded enclosure. Trapezoid shape allows use as a powered monitor wedge.

Rubber feet for stacking enclosure on structures or subwoofers.

B215D B212D

Stereo music system

You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo “breakout” adapter into your deck’s output jack and run the cables to the ¼" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party!

Marvelous monitoring

Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only

a single XLR or ¼" cable from the

Page 3 of 5

State-of-the-art 1.35" aluminum- diaphragm compression driver for exceptional high-frequency reproduction.

Ultra-wide dispersion and large format horn.

Extremely powerful 15"/12"/10"/8" long-excursion

LF transducer provides incredibly deep bass and acoustic power.

1-/" (35-mm) pole socket for standard speaker stands.

B210DB208D

monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel.

Custom-designed transducers

Let’s face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don’t cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality,

Continued on next page