Connecting the USB Hard Drive to an IBM
Step 5
AC power adapter
Step 3
to USB Hard Drive
DC IN Power Input
Step 4
to AC outlet
power cable
Figure 5. Connecting the Power Adapter and Cable
6.Connect the wider plug of the included USB 2.0 cable to a USB port on your computer (Figure 6).
USB 2.0/1.1 port
on computer
USB 2.0 cable
Step 6
Figure 6. Connecting to USB Port on Computer
7.Connect the other end of the USB 2.0 cable to the USB 2.0 port on the rear panel of the USB hard drive (Figure 4 on page 5).
Note: If you are connecting the cable to a USB 2.0 hub, use a USB hub that features an AC power adapter. Connect the cable directly to a USB 2.0 port on the computer or USB hub. Do not connect the cable to a USB connector on the keyboard.
8.Turn on the power switch on the USB hard drive. Confirm that the Power LED on the USB hard drive lights up.
Note: If you have an IBM
6 | TEAC USB Hard Drive Installation Guide |