Emotiva A-100 user manual FCC Interference Statement

Page 4

Only connect the A-100 to an electrical outlet or extension cord of appropriate type and rating. DO NOT defeat the safety purpose of a grounding or three-pronged plug by removing ground pins or using unsafe adapters. If you replace the A-100 power cord, only use one of similar type and equal or greater current rating.

The power cable for the A-100 should be unplugged from the outlet during severe electrical storms, or when unused for a long period of time.

The A-100 should only be cleaned as directed in the User Manual. Avoid spraying liquids directly onto the A-100 and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside of the A-100.

You should seek service for your A-100 by qualified service personnel if any of the ! following occur:

1. The power-supply cord or the plug has been damaged

2. Objects or liquid have fallen or spilled into the vents

3. The A-100 has been exposed to rain

4. The A-100 exhibits a marked change in performance

5. The A-100 has been dropped or its enclosure or chassis is damaged.

FCC Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that of the receiver.

Consult the dealer or an experienced radio/TV technician for help.

For questions regarding service, please contact:

Emotiva Audio Corporation 135 SE Parkway Court Franklin, Tennessee 37064

(615)790-6754 www.emotiva.com

Image 4
Contents Page Page Important Safety Precautions and Explanation of Symbols FCC Interference Statement Mini-X A-100 Stereo Amplifier Contents Page Introduction About This Manual Features Unpacking Volume Illuminated Position LED Control Status Ring Input Outputs SwitchEmotiva Mini-X A-100 Line-level SpeakerQuick Start Connecting an input source to the Mini-X A-100 Connecting speakers to the Mini-X A-100Connections Power Mode switch Configuration and OperationLine Voltage Application Suggestions Examples Audio signal controlSimple trigger control Periodic Maintenance Care and MaintenanceCleaning the Emotiva Mini-X A-100 Specifications Power outputTroubleshooting Emotiva Audio Corporation Five Year Limited Warranty Page Contact Information Emotiva Phone NumbersEmotiva email addresses Emotiva Shipping AddressAccessories Speaker cables