Directed Electronics OHD1502 manual Replacement of battery, Precautions

Replacement of battery

NOTE : Before using remote after installation, remove the battery plastic protective slip.

2

1

1.Move the small latch to the right and slide out the battery holder.

2.Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as shown above.

3.Push battery holder back into its compartment until it is locked.

Precautions

1.Properly dispose of used battery.

2.Do not misuse battery by shorting the positive “+” and negative “-”terminal or put it into fire. Overheating may cause the battery to explode and cause a fire hazard.

3.If the remote is not to be used for a long period, remove the battery from the remote to prevent damage from battery leakage.

4.To avoid accidents, prevent children from playing with the battery.

8

© 2004 Directed Electronics, Inc