Docking the Computer
To connect (or dock) your computer to the APR, perform the following steps:
1.Verify that the operating system has completed the setup process. For instruc- tions, refer to the Setup Guide that accompanied your computer.
2.Save and close all open files, exit all open application programs, and shut down the computer.
3.If you have not already done so, connect the AC adapter to the connector on the APR (see Figure
4.Horizontally center the computer on the APR platform, with the back of the computer facing the APR’s docking connector, as shown in Figure
5.Slide the computer toward the connector until you feel the grooves on the bottom of the computer engage with the alignment rails.
NOTICE: If you attempt to push the computer all the way into the APR without engaging the alignment rails, you may irreparably damage the docking connector on the computer.
NOTE: If you have a monitor stand installed, you will not be able to see the alignment rails or the docking connector.
6.Gently push the computer forward until the docking connector is fully engaged.
docking connector
alignment rails (2)
Figure 1-4. Docking the Computer
Dell Inspiron Advanced Port Replicator User’s Guide |