Rev 1.0
Card Installation 
3 Card Installation
3.1Hardware RequirementsTBD
Before installing the mezzanine card, make sure that the system meets the hardware and software requirements listed in
Table 7 - Jumper Configuration
Requirement | Description |
|
|
Hardware | Used with Dell Blade Servers |
|
|
Software Operating Sys- | Refer to the Dell Blade Servers Manuals |
tems/Distributions |
|
|
|
3.2Installation Kit
Make sure all of the parts are in the kit before you start the installation. If any parts are damaged or missing, call your supplier immediately.
Installation Instructions
Installation of this mezzanine card should only be done by a properly qualified technician or engi- neer. Installation or service not authorized by Dell or performed by unqualified personnel may void guarantees and warranties. Read and follow all safety precautions specified in this document and in the PowerEdge documentation.
18
Mellanox Technologies