Run the Installation Software
1.Insert the Drivers and Utilities CD into your computer.
2.The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start →Run, type D:\CDFE.exe (where D is the drive letter of your CD), and then click OK.
3.When the Drivers and Utilities CD screen appears, click Network Installation - Install the printer for use on a network. If using Windows XP, Windows 2000, Windows NT 4.0, or Windows 2003 Server, go to step 4. For all other operating systems, go to step 5.
4.For local installation, select Local Installation - Install printer on this computer, and then click Next.
For remote installation:
a.Select Remote Installation - Install printer on one or more remote computers, and then click Next.
b.Enter your Administrator user name, password, and clients or servers and then click Add.
c.Click Next.
5.Select the network printer you would like to install. If you do not see your printer listed, click Update to refresh the list or click Add Printer to add a printer to the network. You may update the IP address and port name at this point. Click Next.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP address.
6.Select your printer from the list. If you would like to change the printer name listed, enter a new name in the Printer Name field.
7.If you want other users on the network to access this printer, select Share this printer with other computers on the network, and then enter a share name that users will easily identify.
8.If you want to set a printer as the default, select the printer and then click the Set this printer as default check box.
9.If you want to restrict color printing, select the appropriate Color Track option. Enter the password.
10.If the PS Driver is available and you want to install it, click on the check box.
11.Click Next.
Setting Up for Network Printing
25