Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual
2.Remove the keyboard.
3.Remove the hinge cover.
4.Detach the display flex cable from the strain relief and the graphics card.
5.Remove the three
6.Separate the video graphics board from the system board connector.
Replacing the Video Graphics Board
1.Align the three screw holes and press down firmly on the word "Dell" to seat the board in its connector.
NOTICE: Make sure the board is correctly and firmly seated before continuing. Failure to do so will cause intermittent video failures.
2. Replace the three screws.
Palmrest Assembly
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.
Palmrest Assembly
file:///F/Service%20Manuals/Dell/Latitude/c800/ch2.htm (32 of 49) [2/28/2004 8:00:16 AM]