Dell 6450 manual

For systems using NetWare 5.0, the following minimum configuration is required to support hot-plug expansion cards:

￿Novell NetWare 5.0 symmetric multiprocessing (SMP) operating system with Support Pack 3A or later

￿The latest Dell system-bus driver, as provided on the Dell OpenManage Server Assistant CD

The following PCI expansion cards are supported:

￿

￿

￿

￿

Intel® EtherExpress™ PRO/10+ server adapter card

Intel EtherExpress PRO/100+ server adapter card

Intel EtherExpress PRO/100+ Dual Port server adapter card

Intel PRO/1000 server adapter card

(Other cards may be qualified for hot-plug operations by Dell in the future; contact Dell for current information.)

￿"￿￿*,￿￿￿#￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿#￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿#￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿-￿￿￿￿￿￿￿￿!

Pairs of light-emitting diodes (LEDs) adjacent to each expansion slot display each expansion-card connector's current status (see Figure 8-3). Table 8-1 lists the various codes for the hot-plug LED indicators.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿!￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿
￿￿￿￿￿￿	￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
￿￿￿	￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿
Off	Off	Yes	Connector power is off
On	Off	No	Connector power is on
Flash	Off	No	Connector is being powered up or
			powered down
Off	Flash	Yes	Power-up fault
	slow
On	Flash	No	Identifying a slot by user application
	fast		or device driver

8-4 Dell PowerEdge 6450 Systems Installation and Troubleshooting Guide