Back to Contents Page
Heat Sink
Dell™ Latitude™ 2100 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Heat Sink
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery from the computer.
3.Remove the keyboard from the computer.
4.Remove the access panel from the computer
5.Disconnect the speaker cable and remove the cable from its routing path.
6.Disconnect the fan power cable from the system board.
7.Loosen the four captive screws on the heat sink.
8.Lift up the heat sink and remove it from the computer.