NOTE: If a new processor is installed, you will receive a new
1.Follow the procedures in Before You Begin.
2.Align the
NOTE: The
When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated properly.
CAUTION: To avoid damage to the processor, hold the screwdriver perpendicular to the processor when turning the cam screw.
3.Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
4.Replace the central processor heat sink (see Replacing the Central Processor Heat Sink).