Back to Contents Page
Module Cover
Dell™ Inspiron™ 1564 Service Manual
Removing the Module Cover
Replacing the Module Cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Removing the Module Cover
1.Follow the procedures in Before You Begin.
2.Remove the battery (see Removing the Battery).
3.Loosen the three captive screws that secure the module cover to the computer base.
4.Lift the module cover up at an angle to carefully disengage it from the computer base.
1 | module cover | 2 | captive screws (3) |
|
|
|
|
|
|
3 | module cover tabs (11) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacing the Module Cover
1.Follow the procedures in Before You Begin.
2.Align the tabs on the module cover with the slots on the computer base and gently snap the module cover into place.
3.Tighten the three captive screws that secure the module cover to the computer base.
4.Replace the battery (see Replacing the Battery).