linux video=vga16:off
(The kernel image, followed by the boot parameters.)
You can now boot up okay, but you’ll need to be wary of this when you’re glibly ‘ENTER’ing through menus later in the install — when you’re asked if you want to append anything to the kernel image for the boot loader, you need to type that line (video=vga16:off) again. If you don’t, the screen will get split again.
You can fix a split screen if you already have an installed system by editing your /etc/lilo.conf. In your linux stanza, just put append="video=vga16:off" (this is what would have happened if you’d specified it in the base system config- uration). Then run lilo — your changes won’t take effect until you do. (This will also tell you if you’ve screwed it up somehow — it’s good to
1.2Xserver-XFree86 Configuration
Even after I had the base system installed and happy, I couldn’t get X working as easily as I had in the past (which was basically it coming up upon rebooting after the base installation). I must have configured something wrong, because instead of starting X as usual, the screen flashed a couple times, and then kicked me back to a console.
The way to reconfigure the
to reconfigure X. It’s best just to change one parameter at a time, so you can see what’s working and what’s not.
1.2.1Which Video Card
Even though I had an ATI card, choosing ati in the video card section did not work — I had to choose r128. Strangely enough, this is not an option during the base install! I have no idea why this is. So if you’re using the same image, you will need to reconfigure the
When you reconfigure (as root, of course), choose r128. Then restart X with a ‘/etc/init.d/xdm restart‘.
Having r128 as your video card might make X come up, but unless you’ve magically specified everything else correctly (and the important parameters — at least the ones I had trouble with — are the horizontal and vertical refresh rates, and the screen size), it may be too small (which I never saw), distorted (which I saw a lot), or even turn white and freeze the entire computer (which I also saw a lot).
To prevent having to do a hard reboot (because when X crashes into the mysterious white screen of death, nothing — not even the
—can send the machine the signals it needs to cleanly shut down), have your fingers ready over the CTRL+ALT+F1 keys to take you back to your console
3