Dell 1440 manual Removing the Memory Modules, Replacing the Memory Modules

Page 29

Back to Contents Page

Memory Module(s)

Dell™ Inspiron™ 1440 Service Manual

Removing the Memory Module(s)

Replacing the Memory Module(s)

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the memory supported by your computer.

NOTE: Memory modules purchased from Dell™ are covered under your computer warranty.

Your computer has two user-accessible SODIMM sockets, DIMM A and DIMM B, accessed from the bottom of the computer.

Removing the Memory Module(s)

1.Follow the procedures in Before You Begin.

2.Remove the battery (see Removing the Battery).

3.Remove the module cover (see Removing the Module Cover).

CAUTION: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

4.Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

5.Remove the memory module from the memory module connector.

1

memory module connector

2

securing clips (2)

 

 

 

 

 

 

3

memory module

 

 

 

 

 

 

 

 

 

 

 

 

 

Replacing the Memory Module(s)

CAUTION: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you install a memory module in the connector labeled "DIMM B."

1. Align the notch in the memory module with the tab in the memory module connector.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Page Replacing the Module Cover Module CoverRemoving the Module Cover Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your ComputerBack to Contents Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a CD Page Replacing the Bluetooth Card Internal Card With Bluetooth Wireless TechnologyRemoving the Bluetooth Card Back to Contents Replacing the Camera Camera OptionalRemoving the Camera Back to Contents Replacing the Center Control Cover Center Control CoverRemoving the Center Control Cover Replacing the Coin-Cell Battery Coin-Cell BatteryRemoving the Coin-Cell Battery Replacing the Processor Module Processor ModuleRemoving the Processor Module Back to Contents Replacing the Processor Heat Sink Processor Heat SinkRemoving the Processor Heat Sink Back to Contents Replacing the Daughter Board Daughter BoardRemoving the Daughter Board Display Display AssemblyReplacing the Display Assembly Display Panel Display BezelReplacing the Display Panel Display Panel CableReplacing the Display Panel Cable Removing the Hard Drive Hard DriveReplacing the Hard Drive Removing the Keyboard KeyboardReplacing the Keyboard Replacing the Battery Latch Assembly Battery Latch AssemblyRemoving the Battery Latch Assembly Back to Contents Replacing the Memory Modules Memory ModulesRemoving the Memory Modules Back to Contents Removing the Mini-Card Wireless Mini-CardReplacing the Mini-Card Replacing the Optical Drive Optical DriveRemoving the Optical Drive Removing the Palm Rest Palm RestRouting guides Replacing the Palm Rest Replacing the Power Button Board Power Button BoardRemoving the Power Button Board Back to Contents Replacing the Battery BatteryRemoving the Battery Removing the Speakers SpeakersReplacing the Speakers Removing the System Board System BoardReplacing the System Board Entering the Service Tag in the BiosBack to Contents Back to Contents Removing the USB Board USB BoardReplacing the USB Board
Related manuals
Manual 78 pages 32.87 Kb Manual 70 pages 3.44 Kb

1440 specifications

The Dell 1450 and Dell 1440 are two prominent models in the Dell PowerEdge line of servers, designed with advanced technology to cater to a variety of business needs. Both models serve as efficient and reliable solutions for small to medium-sized businesses, with varying capabilities to support diverse workloads.

The Dell PowerEdge 1450 is known for its high performance in a compact form factor. Equipped with dual Intel Xeon processors, the 1450 supports multiprocessor configurations, which enhances its ability to tackle demanding applications and multitasking scenarios. Its modular design allows for easy scalability, making it adaptable to evolving business requirements. The server can support a wide range of operating systems providing greater flexibility in deployment options.

One of the key features of the Dell 1450 is its extensive memory capacity. It can support up to 8GB of RAM, ensuring that even resource-intensive applications run smoothly. This memory capacity, combined with its robust processing power, makes the 1450 an ideal choice for businesses requiring reliable performance for database applications, web hosting, and virtualization.

On the other hand, the Dell PowerEdge 1440 delivers a balance of performance and affordability while ensuring reliability and durability. This model is often chosen by businesses seeking an effective solution without overspending. The 1440 supports single Intel Pentium III or Xeon processors, which, while slightly less powerful than its counterpart, still provides satisfactory performance for less demanding tasks.

Both servers come fitted with built-in RAID technology, which provides data redundancy and enhances data integrity. RAID configurations protect against potential data loss, making these servers especially pivotal for organizations that prioritize data security. Furthermore, the Dell OpenManage technology integrated into both models allows for seamless administration and monitoring, simplifying server management for IT professionals.

In terms of connectivity, the Dell 1450 and 1440 are equipped with multiple Ethernet ports and expansion slots, supporting a variety of network configurations. This ensures users have ample options for connectivity, which is crucial in today’s interconnected digital landscape.

In conclusion, the Dell 1450 and 1440 stand as robust server solutions, offering varying levels of performance, scalability, and reliability to meet the needs of different businesses. The choice between them ultimately depends on specific organizational requirements, including budget constraints and computing demands, ensuring they can effectively support a range of workloads and applications.
Top Page Image Contents