Replacing the Display Bezel
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.
1.Follow the instructions in Before You Begin.
2.Follow the instructions in Removing the Display Assembly.
3.Starting near the hinges (near the Dell logo), use your fingers to snap the new bezel into place.
4.Replace the six M2.5 x
5.Replace the six rubber bumpers to cover the screws.
6.Replace the display assembly (see Replacing the Display Assembly).
Removing the Display Panel
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.
1.Follow the instructions in Before You Begin.
2.Remove display assembly (see Removing the Display Assembly).
3.Remove the display bezel (see Removing the Display Bezel).
1 | screws (2) | 2 | display panel | 3 | display cover |
|
|
|
|
|
|
4. Remove the two screws securing the display panel to the display cover.