Dell 9400 owner manual Before You Begin, Recommended Tools, Turning Off Your Computer

Page 5

Back to Contents Page

Before You Begin

Dell™ Inspiron™ 9400 Service Manual

Recommended Tools

Turning Off Your Computer

Before Working Inside Your Computer

Computer Orientation

Screw Identification

This section provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist:

•You have performed the steps in Turning Off Your Computer and Before Working Inside Your Computer.

•You have read the safety information in the Dell™ Product Information Guide.

•A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order.

Recommended Tools

The procedures in this document may require the following tools:

•Small flat-blade screwdriver

•Phillips screwdriver

•Small plastic scribe

•Flash BIOS update program CD

Turning Off Your Computer

NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off your computer.

1.Shut down the operating system:

Save and close any open files, exit any open programs, and click Start→ Shut Down→ Shut down.

The computer turns off after the operating system shutdown process finishes.

2.Ensure that the computer and any attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for 4 seconds.

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.

NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

NOTICE: To help prevent damage to the computer, perform the following steps before you begin working inside the computer.

1.Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.

2.Turn off your computer (see Turning Off Your Computer).

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network device.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Abbreviations and Acronyms Removing the Battery Latch Assembly Battery Latch AssemblyReplacing the Battery Latch Assembly Back to Contents Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your ComputerScrew Identification Computer OrientationPage Back to Contents Internal Card With Bluetooth Wireless Technology ExpressCard Cage Mini-Card Back to Contents Replacing the Coin-Cell Battery Coin-Cell BatteryRemoving the Coin-Cell Battery Back to Contents System Components Removing the Processor Module Processor ModuleReplacing the Processor Module Replacing the Processor Thermal-Cooling Assembly Processor Thermal-Cooling AssemblyRemoving the Processor Thermal-Cooling Assembly Back to Contents Display Display AssemblyReplacing the Display Assembly Display Bezel Removing the Display Bezel Replacing the Display Bezel Display PanelPage Replacing the Display Panel Display LatchBack to Contents System Fans Back to Contents Flashing the Bios Replacing the Hard Drive Hard DriveRemoving the Hard Drive Returning a Hard Drive to Dell Replacing the Hinge Cover Hinge CoverRemoving the Hinge Cover Keyboard Removing the Memory Modules Memory ModulesReplacing the Memory Modules Removing the Modem ModemReplacing the Modem Optical Drive Removing the Palm Rest Palm RestReplacing the Palm Rest Replace the hinge cover see Replacing the Hinge Cover USB Connector Pin Assignments for I/O ConnectorsVideo Connector Video TV-Out ConnectorIeee 1394 Connector Replacing the Speakers SpeakersRemoving the Speakers Back to Contents Subwoofer Removing the System Board System BoardPage Remove the processor see Removing the Processor Module Replacing the System BoardBack to Contents Back to Contents Replacing the USB Port Board USB Port BoardRemoving the USB Port Board Back to Contents Replacing the Video Card/Thermal-Cooling Assembly Video Card/Thermal-Cooling AssemblyRemoving the Video Card/Thermal-Cooling Assembly Back to Contents
Related manuals
Manual 23 pages 28.14 Kb

9400 specifications

The Dell Latitude D9400, introduced as part of the Latitude series, is a high-performance laptop targeting business users and professionals who demand reliability and strong performance. Known for its robust design, the D9400 integrates powerful hardware features with advanced technologies to cater to various professional needs.

One of the key features of the Dell 9400 is its display. It comes with a 17-inch widescreen LCD that offers vibrant colors and sharp visuals, making it ideal for presentations and multimedia tasks. The resolution options range from standard to high-definition, providing users with flexibility based on their requirements. Furthermore, the anti-glare coating minimizes reflections, enhancing the overall viewing experience under different lighting conditions.

Performance-wise, the Latitude D9400 stands out with its Intel Core processors, which offer high processing power and efficiency. The D9400 can be configured with various RAM options, allowing users to run multiple applications smoothly and enhance overall productivity. Additionally, the laptop supports substantial storage options, including SATA hard drives and solid-state drives (SSDs), ensuring that users have ample space for their files, applications, and data.

The Dell D9400 is engineered with various connectivity options, including several USB ports, an HDMI output, and Ethernet ports, ensuring that users can connect to various devices and networks seamlessly. It also comes with built-in Wi-Fi and optional mobile broadband capabilities, providing users with connectivity on the go.

The laptop’s design incorporates a durable chassis suitable for frequent travel, making it an excellent choice for business professionals. Its spill-resistant keyboard adds to its practicality, ensuring that accidental spills do not result in lasting damage. Furthermore, the battery life of the Latitude D9400 is optimized for long usage, crucial for professionals who are often on the move.

In terms of security, the Dell 9400 includes features like a fingerprint reader and smart card reader, enhancing data protection and user privacy. These characteristics make it a suitable choice for enterprise environments where data security is of paramount importance.

Ultimately, the Dell Latitude D9400’s combination of robust features, connectivity options, and security technologies creates a versatile workhorse tailored for the demanding needs of professionals and businesses alike. Whether it is for tasks involving heavy computational work or day-to-day office applications, the D9400 stands as a reliable option in the competitive business laptop landscape.
Top Page Image Contents