AC6CD Operation

Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and held tight to the wall surface. Caution: Do not over tighten!

Painting the Speaker

A paint shields is included in each AC6CD speaker package. Place the paint shield inside the frame to protect the speaker. You can now safely paint the speaker’s frame to match your wall surface if you desire.

When painting the grill caution should be taken to ensure that paint does not clog or congest the perforated openings in the grill. This would prevent proper operation of the grill by restricting the airflow from the individual drivers in the speaker.

The AC6CD speaker is designed for use where the user desires to have sound available in an area but does not need stereo imaging. This may be because of limited space, such as a bathroom or dressing area, or a long hallway where even distribution of sound is desired but stereo imaging is impractical.

(+) Amp

(-) Amp

AC6CD

6.5” Two Way

Dual Mono In-Ceilling

100W

Figure 4

The AC6CD uses a dual voice coil woofer and dual tweet- ers. The speaker has separate terminals to allow each channel of a stereo amplifier to be connected to the one speaker.

The AC6CD can also be operated by a single channel from an amplifier and used just like any conventional in-ceiling or in-wall speaker. In this configuration you should wire the speaker terminals in parallel (fig. 4).

Removing the AC6CD Speaker

Should it ever become necessary to remove the AC6CD speaker from the ceiling, simply remove the grill and turn the four mounting screws counter-clockwise until you feel the doglegs lock out of position in their resting flange. The speaker should easily come out of the wall for service or replacement.

Recommended Speaker Wire Gauges

The resistance of the speaker wire in your installation can cause your speakers to perform at less than their optimum quality level. Excess resistance caused by using an undersized speaker wire can result in loss of detail and definition in the bass region of your audio program, as well as, a loss of dynamic range. Over extremely long wire runs you may even experience a loss of high frequency amplitude in the audio signal.

To prevent this effect in your installation we have recommended speaker wire gauges that should not exceed 0.5 ohms resistance over the recommended length of wire run.

For the AC6CD speakers we suggest the following minimum speaker wire gauge be used:

50’ or less - 16 Gauge 4-Cond. CL3 50’ - 150’ - 12 Gauge 4-Cond. CL3 150’ - 200’ - 10 Gauge 4-Cond. CL3

AudioSource In-Ceiling Speaker System specifications

The AudioSource In-Ceiling Speaker System represents a remarkable solution for those seeking to enhance their home audio experience without compromising on aesthetics. Designed for discreet installation, these in-ceiling speakers blend seamlessly into any room, allowing for an immersive sound environment without visible hardware.

One of the standout features of the AudioSource In-Ceiling Speaker System is its exceptional sound quality. With a frequency response range that covers both deep bass and crisp highs, these speakers provide a balanced audio output suitable for various music genres and media types. The integration of high-quality drivers ensures clear sound reproduction, allowing listeners to fully appreciate their favorite tracks and movie soundtracks.

In terms of technology, the AudioSource In-Ceiling Speaker System utilizes advanced engineering principles. The speakers are designed with a swivel-mounted tweeter, enabling users to direct sound towards specific areas in the room. This feature is particularly beneficial for home theater setups, where precise sound placement can enhance the overall viewing experience. Additionally, the system employs a robust crossover network that effectively manages the distribution of frequencies between the woofer and tweeter, optimizing performance across the audio spectrum.

The construction of the speakers is another key characteristic that sets the AudioSource model apart. Crafted from durable materials, the speakers are designed to withstand the rigors of installation in various environments. Their lightweight yet sturdy design makes for easy installation, facilitating a range of applications from home theaters to multi-room audio setups.

These in-ceiling speakers also offer versatility in terms of compatibility. They can be easily integrated into a variety of audio systems, whether for a simple stereo setup or part of a more complex surround sound system. This flexibility ensures that users can enjoy their audio experience tailored to their preferences and existing equipment.

Another noteworthy aspect is the aesthetic appeal of the AudioSource In-Ceiling Speaker System. With their low-profile design, these speakers virtually disappear into the ceiling, allowing for a clean and modern look. This feature is particularly appealing in contemporary spaces where traditional speakers may detract from the overall design.

In conclusion, the AudioSource In-Ceiling Speaker System combines superior sound quality, innovative technology, and a sleek design, making it an excellent choice for anyone looking to elevate their audio experience while maintaining an unobtrusive appearance in their living space.