Dell E5410 specifications Removing the LED Cover

Back to Contents Page

LED Cover

Dell™ Latitude™ E5410 Discrete Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the LED Cover

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the battery.

3.Open the display at an 180 degree angle. On the right side of the computer, use a flat-bladed screwdriver or spudger (inserted into the notch) to pry up the LED cover.

4. Gently pry along the edge of the LED cover to release it from the latches and remove.