Dell MD1000 owner manual Removing and Installing the Control Panel, Removing the Control Panel

Page 38

Installing a Power Supply/Cooling Fan Module

1Carefully slide the new power supply/cooling fan module approximately two-thirds of the way into the empty bay.

2Gently push the module all the way to the back of the bay until it is firmly seated in the backplane connector.

The power supply is seated when its front plate is even with the front plate of the adjacent power supply.

NOTE: If the enclosure is powered on, all power supply LEDs (see Figure 1-8)remain off until you connect the AC power cable to the power supply and turn on the on/off switch.

3Tighten the two captive screws to secure the new power supply/cooling fan module in the bay.

4Connect the AC power cable to the new power supply and to an electrical outlet.

5Turn on the on/off switch on the new power supply.

Removing and Installing the Control Panel

The control panel powers the LED indicators on the front panel of the system, as well as the Enclosure Mode Selection switch. It is connected to the backplane and cannot be removed or replaced unless the system is powered down.

CAUTION: Only trained service technicians are authorized to remove the enclosure cover and access any of the components inside the enclosure. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the enclosure and protecting against electrostatic discharge.

Removing the Control Panel

1Power down your host server.

2Power down your enclosure.

3Disconnect all power cables to the enclosure.

4Loosen the two thumbscrews on the front of the enclosure panel and pull the enclosure approximately six inches out from the rack (see Figure 3-8).

5Remove all the drives from the enclosure (see "Removing and Installing Drives").

NOTE: To avoid confusion when re-installing the drives, mark each drive with its slot position as you remove it.

40

Installing Enclosure Components

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Dell PowerVault MD1000 Storage Enclosure May Contents Troubleshooting Your Enclosure Getting Help Contents About Your System Other Information You May NeedIndicators on the Enclosure Bezel Front-Panel Indicators and Features Front-Panel Components Icon ConditionDrive Carrier LED Indicators Drive Carrier LED IndicatorsBack-Panel Indicators and Features LEDBack-Panel Features Enclosure Management Module EMMEMM External Panel EMM Component Functions Icon Unified Mode and Split Mode About Your System Enclosure Failover When Two EMMs are Installed Enclosure Mode Switch SettingsPower Supply and Cooling Fan Features EMM Thermal ShutdownEnclosure Alarms Critical and Noncritical Events Critical EventsBefore You Begin Cabling Your Enclosure for Unified or Split ModeOperating Your Storage Enclosure Connecting the Enclosure Unified Mode Split Mode Minimum Requirements Operating Your Storage Enclosure Changing Your Enclosure’s Operating Mode Managing Your Storage Enclosure Downloading FirmwareOperating Your Storage Enclosure Removing and Replacing the Front Bezel Installing Enclosure ComponentsRecommended Tools Removing and Installing Drives Installing and Removing the Front BezelInstalling and Removing Drives Removing Drives from the EnclosureInstalling SAS Drives in the Enclosure Installing the Drive in the Carrier Installing Sata Drives in the Enclosure Screws Removing and Installing an EMM Removing an EMMInstalling an EMM Removing and Installing an EMMInstalling and Removing an EMM Module Cover Installing an EMM Module Cover in an Empty BayRemoving and Installing the Power Supply/Cooling Fan Module Removing a Power Supply/Cooling Fan Module Replacing the Power SupplyRemoving the Control Panel Removing and Installing the Control PanelInstalling a Power Supply/Cooling Fan Module Installing the Control Panel Removing and Replacing the Control PanelRemoving and Installing the Midplane Removing and Replacing the EMM/Power Supply Cage10. Removing and Installing the Midplane Installing Enclosure Components Troubleshooting a Loss of Communication Condition Troubleshooting Your EnclosureSafety First-For You and Your Enclosure Start-Up RoutineForeign Configuration Failed Virtual Disks Troubleshooting External Connections Troubleshooting a Wet EnclosureTroubleshooting a Damaged Enclosure Troubleshooting Power SuppliesTroubleshooting Enclosure Cooling Problems Troubleshooting SAS and Sata Drives Troubleshooting a FanTroubleshooting Enclosure Connections Troubleshooting Your Enclosure Technical Assistance Online ServicesGetting Help Technical Support Service AutoTech ServiceAutomated Order-Status Service Getting Help Before You Call Contacting DellGlossary GlossaryDIN Deutsche Industrie Norm Glossary Glossary Glossary System memory See RAM Glossary Glossary Index Index
Related manuals
Manual 11 pages 28.32 Kb Manual 64 pages 35.64 Kb

MD1000 specifications

The Dell MD1000 is a storage enclosure designed to provide a scalable and reliable solution for enterprises seeking efficient data storage management. Recognized for its robust performance and versatility, the MD1000 supports a variety of applications, making it a popular choice among organizations that demand high-capacity storage solutions.

One of the standout features of the MD1000 is its modular design, allowing it to integrate seamlessly with various Dell server systems. It provides efficient data storage through its 3.5-inch drive bays, accommodating up to 15 hard drives or solid-state drives. This configuration not only facilitates higher storage density but also supports SATA and SAS drives, offering the flexibility to choose different types of storage media based on organizational needs.

The MD1000 features advanced RAID (Redundant Array of Independent Disks) technology, which enhances data protection and system performance. It supports multiple RAID levels, including RAID 0, 1, 5, 6, and 10, providing users with different options for balancing performance and redundancy. By leveraging RAID, the MD1000 ensures that data remains safe and accessible even in the event of hardware failure, significantly reducing downtime and risk.

Connectivity is another strength of the MD1000. It typically interfaces with a server through a variety of host interface options including iSCSI and Fibre Channel, making it adaptable to different network configurations. This connectivity flexibility supports various environments, ensuring organizations can scale their storage without significant infrastructure overhauls.

Cooling and power efficiency are also critical characteristics of the MD1000. It includes dual-redundant power supplies and cooling fans that not only enhance reliability but also lower operational costs. These components can function independently, ensuring that power loss in one does not affect overall system performance.

Management and monitoring capabilities of the MD1000 are empowered by the Dell OpenManage software, which provides a user-friendly interface to manage the storage subsystem. Users can easily monitor drive health, configure RAID settings, and receive alerts on potential issues, simplifying the administration of large storage networks.

Overall, the Dell MD1000 is built to accommodate growing storage needs while ensuring reliability, performance, and ease of use. With its modular design, support for various drive types, robust RAID capabilities, versatile connectivity options, and efficient power management, it represents an excellent choice for businesses looking to enhance their data storage infrastructure.
Top Page Image Contents