Dell M60 manual Installing the System Board

Page 31

1system board

2speaker connector

3speakers

Installing the System Board

1.Perform all of the steps in "Removing the System Board" in reverse order.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

2.Turn on the computer.

NOTE: After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.

3.Insert the floppy disk or CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.

Back to Contents Page

Image 31

Contents

June 2003 Rev. A00 Preparing to Work Inside the Computer Before You BeginRecommended Tools Screw Identification Computer OrientationPage System Board Each Flashing the Bios Bluetooth Card Removing the Color Insert Cover Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly Display AssemblyDisplay Panel Display BezelPage Back to Contents Docking Doors Installing the Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Keyboard Back to Contents Base Latch Palm Rest Back to Contents Parallel Connector Pin Assignments for I/O ConnectorsUSB Connector Video ConnectorSerial Connector Video TV-Out ConnectorDell D/Bay Connector Reserve Battery Speakers Removing the System Board System BoardPage Installing the System Board System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly MarchJune 2003 Rev. A00 Memory Module Memory Module, Mini PCI Card, Modem, and ModulesMini PCI Card Page Modem Modules If the Device Screw Is Not InstalledIf the Device Screw Is Installed Back to Contents Video Card