Option | Description | |
|
| |
Wireless Radio Control | Allows you to control the WLAN and WWAN radio. The options are: | |
| • | Control WLAN radio |
| • | Control WWAN radio |
| Default Setting: both the options are disabled. | |
Wake on LAN/WLAN | This option allows the computer to power up from the off state when triggered by a | |
| special LAN signal. | |
| and must be enabled in the operating system. This feature only works when the | |
| computer is connected to AC power supply. | |
| • Disabled - Does not allow the system to power on by special LAN signals | |
|
| when it receives a |
|
| Setting) |
| • LAN Only - Allows the system to be powered on by special LAN signals. | |
| • | WLAN Only |
| • | LAN or WLAN |
Block Sleep | Allows you to block the computer from entering into the sleep state. Option is | |
| disabled by default. | |
| • | Block Sleep (S3) |
Primary Battery Configuration | Allows you to define how to use the battery charge, when AC is plugged in. The | |
| options are: | |
| • | Standard Charge |
| • | Express Charge |
| • | Predominantly AC use |
| • Auto Charge (Default Setting) | |
| • Custom Charge — you can set the percentage to which the battery must | |
|
| charge . |
|
| NOTE: All charging modes may not be available for all the batteries. |
Battery Slice Configuration | Allows you to define the how to charge the battery. The options are: | |
| • | Standard Charge |
| • Express Charge (Default Setting) | |
Table 8. POST Behavior |
|
|
|
| |
Option | Description | |
|
| |
Adapter Warnings | Allows you to activate the adapter warning messages when certain power | |
| adapters are used. The option is enabled by default. | |
| • | Enable Adapter Warnings |
Mouse/Touchpad | Allows you to define how the computer handles the mouse and touchpad input. The | |
| options are: | |
| • | Serial Mouse |
| • | PS2 Mouse |
67