Dell FE400 manual September 6W455

Page 2

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Dell OpenManage, PowerEdge, and PowerVault are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation; EMC, Navisphere, and PowerPath are registered trademarks of EMC Corporation; Access Logix, MirrorView, and SnapView are trademarks of EMC Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

September 2004

P/N 6W455

Rev. A05

Image 2
Contents Platform Guide W . d e l l . c o m s u p p o r t . d e l l . c o mSeptember 6W455 Supported Cluster Configurations Windows Server 2003, Enterprise Edition High-Availability Cluster ConfigurationsWindows 2000 Advanced Server Fibre Channel Switches Maximum Distance Between Cluster Nodes PCI PXI-X Slot Slot Type Slot Speed QLogic QLA2340 Emulex LP1050-EX PCIe Emulex LP1050-EX Drives through mount points Attaching Your Cluster Shared Storage System to a SAN Incorrect TimeOutValue setting in the Registry Best PracticesEmulex Configuration Tool window appears HKLM\System\CurrentControlSet\Services\Disk\TimeOutValueUsing a Tape Backup Library in a SAN Cluster disks are not initialized in Disk Management