5.Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)SD card
b)battery
c)base cover
d)keyboard trim
e)keyboard
f)palmrest
3.Remove the screw that secures the
4.Perform the following steps as shown in the illustration:
a)Lift the latch that secures I/O cable to the computer [1].
b)Disconnect the I/O cable from the system board [2].
5.Disconnect the
Installing the Coin-Cell Battery
1.Place the
2.Route the cables and connect the
3.Connect the I/O cable to the system board.
4.Tighten the screw that secures the
5.Install:
a)palmrest
b)keyboard
c)keyboard trim
d)base cover
e)battery
f)SD card
6.Follow the procedures in After Working Inside Your Computer.
22