Dell M2800 owner manual Installing the Power Connector, Removing the Heat-Sink Assembly

Page 24

Installing the Power Connector

1.Align the power connector to its position in the computer.

2.Place the power-connector bracket on the power connector.

3.Tighten the screw to secure the power-connector bracket to the computer.

4.Route the cable through the routing channel.

5.Connect the cable to the system board.

6.Install:

a.base cover

b.base-corner cover (right)

c.battery

7.Follow the procedures in After Working Inside Your Computer.

Removing the Heat-Sink Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.base cover

3.Disconnect the fan cable and remove the screws that secure the heat-sink assembly to the system board.

24

Image 24

Contents

Dell Precision M2800 Page Contents Technical Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your Computer Recommended Tools System OverviewFollow the procedures in Before Working Inside your computer Removing the Secure Digital SD CardInstalling the Secure Digital SD Card Installing the ExpressCardRemoving the Battery Follow the procedures in After Working Inside Your ComputerFlip the battery out of the computer Installing the Battery Removing the Base CoverLift the base cover and remove it from the computer Installing the Base Cover Removing the Base-Corner CoversInstalling the Base-Corner Covers Battery Base coverRemoving the Memory Installing the Memory Removing the Hard DriveInstalling the Hard Drive Removing the Optical DriveInstalling the Optical Drive Removing the Wireless Local Area Network Wlan Card Installing the Wlan Card Removing the Wireless Wide Area Network Wwan Card Installing the Wwan Card Removing the Network ConnectorBattery Base cover Base-corner cover left Installing the Network Connector Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Power ConnectorBattery Base-corner cover right Base cover Installing the Power Connector Removing the Heat-Sink AssemblyInstalling the Heat-Sink Assembly Battery Base cover HeatsinkRemoving the Processor Installing the Processor Removing the KeyboardInstalling the Keyboard Removing the Palmrest AssemblySD card ExpressCard Battery Keyboard Display-hinge cap Base cover Base-corner covers Page Page Installing the Palmrest Assembly Removing the WiFi-Switch Board Installing the WiFi-Switch BoardInstalling the VGA Board Removing the VGA BoardRemoving the ExpressCard Cage Installing the ExpressCard Cage Removing the System BoardPage Lift the system board from the computer Installing the System Board Removing the Speakers Lift the speakers from the computer Installing the Speakers Installing the Display-Hinge Cap Removing the Display AssemblyBattery Display-hinge cap Base cover Base-corner covers Removing the Display-Hinge CapPage Page Remove the display assembly from the computer Installing the Display Assembly Removing the Display BezelPage Installing the Display Bezel Removing the Display PanelDisplay bezel Page Installing the Display Panel Removing the Display HingesInstalling the Display Hinges Battery Display assembly Display bezelRemoving the Camera Display bezel Display panelInstalling the Camera Boot Sequence Navigation KeysSystem Setup Options UefiPS2 SATA-4 Video Secure Boot Power Management Post Behavior Virtualization Support Updating the Bios WlanSystem and Setup Password Password TypePage Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsBattery Status Lights Device Status LightsPage Technical Specifications UMA USB Feature Specification Axis 45.00 mm Feature Specification Weight 36 kg 5.21 lb Contacting Dell