Back to Contents Page
ExpressCard/SD Card Reader
Dell™ Vostro™ V13 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the ExpressCard/SD Card Reader
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the ExpressCard, if applicable.
3.Remove the SD card, if applicable.
4.Remove the base cover.
5.Remove the battery.
6.Remove the hard drive and audio board.
7.Remove the WLAN card.
8.Remove the LCD cover.
9.Remove the memory.
10.Remove the keyboard.
11.Remove the screws that secure the card reader to the computer.
12.Carefully turn over the computer.
13.Lift the clip that secures the
14.Lift the card reader up and away from the computer.
Replacing the Card Reader
To replace the card reader, perform the above steps in reverse order.