Dell D820 manual Processor Thermal-Cooling Assembly

Page 11

Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Latitude™ D820 Service Manual

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

1.Follow the instructions in Before Working Inside Your Computer.

2.Remove the hinge cover (see Hinge Cover).

3.Remove the keyboard (see Keyboard).

4.Remove the display assembly (see Display Assembly).

5.Remove the palm rest (see Palm Rest).

6.Loosen in consecutive order the six captive screws, labeled "1" through "6," in the processor thermal-cooling assembly.

NOTE: The appearance of the thermal-cooling assembly for system boards with integrated graphics varies from that for system boards with discrete graphics (shown).

1

processor thermal-cooling assembly

2

captive screws (6)

 

 

 

 

 

 

 

 

7.Lift the assembly out of the computer.

Back to Contents Page

Image 11
Contents June 2006 Rev. A01 Remove the processor see Removing the Processor Module BaseBattery Latch Before Working Inside Your Computer Before You BeginRecommended Tools Turning Off Your ComputerComputer Orientation Internal Card with Bluetooth Wireless Technology Coin-Cell Battery System Components Removing the Processor Module Installing the Processor ModuleProcessor Module Back to Contents Processor Thermal-Cooling Assembly Removing the Display Assembly Display AssemblyRemoving the Display Bezel Removing the Display Panel Brackets Installing the Display PanelRemoving the Display Panel Removing the Display Latch Back to Contents Fan Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a CD Hard Drive Back to Contents Hinge Cover Keyboard Memory Page Back to Contents Communications Cards Wireless CardsMobile Broadband Cards Subscriber Identity Module SIM Card SIM card Modem Palm Rest Back to Contents PC Card Reader Video Connector Pinout Assignments for I/O ConnectorsUSB Connector Removing the System Board System BoardInstalling the System Board Page June 2006 Rev. A01
Related manuals
Manual 2 pages 29.53 Kb