Back to Contents Page
Status Lights Board
Dell™ Inspiron™ 1018 Service Manual
Removing the Status Lights Board
Replacing the Status Lights Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Removing the Status Lights Board
1.Follow the instructions in Before You Begin.
2.Remove the battery (see Removing the Battery).
3.Remove the keyboard (see Removing the Keyboard).
4.Remove the
5.Remove the palm rest assembly (see Removing the Palm Rest Assembly).
6.Remove the memory module (see Removing the Memory Module).
7.Push the
8.Remove the screw that secures the status lights board to the computer base.
9.Lift the status lights board off the computer base.
1
3
screw | 2 | status lights board cable |
|
|
|
status lights board |
| |
|
|
|
Replacing the Status Lights Board
1. Follow the instructions in Before You Begin.