1
3
rubber pads (2) | 2 | screws (2) |
display bezel
Replacing the Display Bezel
1.Follow the instructions in Before You Begin.
2.Align the display bezel over the display back cover, and gently snap into place.
3.Replace the two screws that secure the display bezel to the display back cover.
4.Replace the two rubber pads that cover the display bezel screws.
5.Replace the display assembly (see Replacing the Display Assembly).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
Display Panel
Removing the Display Panel
1.Follow the instructions in Before You Begin.
2.Remove the display assembly (see Removing the Display Assembly).
3.Remove the display bezel (see Removing the Display Bezel).
4.Remove the four screws that secure the display panel to the display back cover.
5.Disconnect the camera cable from the connector on the camera module.