Atlas Sound AHSUB15S manual Speaker Cable Recommendations And Connection Instructions

Page 5

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004339 RevA 5/12

5/6

AH Series Stadium Subwoofer

AHSUB15S

Speaker Cable Recommendations And Connection Instructions

Wire Gauges

For very short distance speaker cable runs (less than 25’) 16-gauge, stranded, twisted pair speaker cable may be used. For speaker cable runs between 25' and 75', 14-gauge, stranded, twisted pair speaker cable is recommended. For speaker cable runs greater than 75', 12-gauge, stranded, twisted pair speaker cable is necessary. For runs exceeding 150', please contact tech support for proper wire gauge.

Input connections are provided on a convenient recessed terminal block located on the bottom of the loudspeaker. This terminal block includes a clear weather resistant cover which should be re-installed after terminating the speaker cabling to prevent corrosion in outdoor applications.

Allow an adequate service loop for this connection to allow tilt of the loudspeaker. If the speaker is tilted above parallel to the ground, water may collect in the speaker cabinet causing damage — the product should not be installed tilted upwards!

Amplifier Considerations

Consult your amplifier owner’s manual to confirm power output at the rated impedance.

The AHSUB15S exhibits an 8Ω (nominal) impedance.

(x2) AHSUB15S paralleled will present a 4Ω load to the amplifier.

(x3) AHSUB15S paralleled will present a 2.66Ω load to the amplifier.

(x4) AHSUB15S paralleled will present a 2Ω load to the amplifier.

ATLAS SOUND speaker system specifications list RMS power handling.

As a reference, peak power = RMS x 1.414.

These ratings should be considered in selecting the best amplifier to power the speaker system.

For general use, amplifier output should match or exceed the RMS rated power of the speaker system (250 Watts).

For increased headroom and dynamic reproduction, the amplifier’s output should match or exceed the peak power rating of the speaker system (354 Watts). In situations where experienced professionals are operating the speaker system with proper limiting and frequency control devices inserted into the signal path and adjusted properly, amplifier output may meet, but should not exceed 2x the RMS power rating of the speaker system (500 Watts). Utilizing the Atlas Sound model CP700 power amplifier will allow you to easily match required power ratings for most any installation. Visit www.AtlasSound.com for more details on this product.

Cup for Speaker Hook Up

1601 JACK MCKAY BLVD.

TELEPHONE: (800) 876-3333

AtlasSound.com

ENNIS, TEXAS 75119 U.S.A.

FAX (800) 765-3435

 

Image 5
Contents AH Series Stadium Subwoofer Hearing Damage Suspension & Mounting Safety InstructionsOverhead Suspension Installation Ground InstallationEyebolt Working Load Limits Suspended Installation Via Eyebolts IncludedCup for Speaker Hook Up Speaker Cable Recommendations And Connection InstructionsAmplifier Considerations Specifications
Related manuals
Manual 12 pages 26.02 Kb

AHSUB15S specifications

The Atlas Sound AHSUB15S is a powerful subwoofer designed to deliver deep, impactful bass for a variety of applications, including live sound, installations, and events. This high-performance speaker is particularly favored by audio professionals who demand reliability and high fidelity in their sound systems.

One of the standout features of the AHSUB15S is its robust construction. The enclosure is built from durable wood, which not only enhances its durability but also minimizes unwanted resonance, allowing for clearer sound reproduction. The subwoofer comes with a scratch-resistant finish, making it suitable for both indoor and outdoor events. Its compact design allows for flexible placement options without sacrificing performance.

The AHSUB15S is equipped with a 15-inch woofer that is engineered to produce rich, low-frequency sounds. This driver is capable of handling high power levels, providing exceptional bass response and clarity even at high volumes. With a power handling capacity of up to 600 watts RMS and a peak power of 1200 watts, this subwoofer can easily fill large spaces with powerful sound.

In terms of connectivity, the Atlas Sound AHSUB15S is designed for versatility. It features multiple input options, including XLR and 1/4-inch connectors, allowing for easy integration with various audio sources. This makes it ideal for a range of scenarios, including live performances, DJ setups, and sound reinforcement for events.

The AHSUB15S also includes a built-in crossover, which helps to efficiently manage the frequencies sent to the subwoofer, ensuring that it only reproduces the bass frequencies while leaving the mids and highs to other speakers in the setup. This active crossover not only enhances the overall sound quality but also increases the efficiency of the entire sound system.

For added convenience, the AHSUB15S is equipped with a pole mount socket, allowing it to be easily paired with a variety of speaker tops for a complete sound solution. This feature makes it particularly useful for mobile DJs and sound technicians who require a versatile and easy-to-setup system.

In summary, the Atlas Sound AHSUB15S subwoofer stands out for its powerful bass response, durable construction, versatile connectivity options, and thoughtful design features, making it an excellent choice for professionals looking to enhance their audio experience. Whether for a live event or a fixed installation, the AHSUB15S provides the performance needed to ensure impactful sound delivery.