Dell Guide to Disassembling Monitors: Removing the Stand and Bezel

Dell E176FPc

6. Disassembly Flow Chart

Tools: 2 Power screwdrivers (φ=5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver;

Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm

Note: Firstly, put the monitor on a soft, flat and clean surface, wear gloves.

Fig Remark

Remove stand:

Press the Stand release button and lift up the Stand and away from the monitor.

Remove bezel:

1. Remove the 4 screws by torque A

2. Pry the monitor up then find out the hooks’ position, use the tool (like the picture or other card) to insert into the gap of bezel and rear cover.

23