Dell D176P manual Plug and Play Capability, Flat Panel Specifications, Resolution Specifications

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Dat (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.

Flat Panel Specifications

Model number		Dell E1910H Flat Panel Monitor
Screen type		Active matrix - TFT LCD
Panel Type		TN
Screen dimensions		18.5 inches
		(18.5-inch wide viewable image size)
Preset display area:
•	Horizontal	409.8 mm (16.1 inches)
•	Vertical	230.4 mm (9.07 inches)
Pixel pitch		0.300 mm
Viewing angle:
•	Horizontal	160° typical
•	Vertical	160° typical
Luminance output		250 CD/m ²(typical)
Contrast ratio		1000 to 1 (typical)
Faceplate coating		Anti-glare
Backlight		2 CCFL edgelight system
Response Time		5ms typical
Color Gamut		83% (typical)*

*Dell E1910H Flat Panel monitor color gamut (typical) is based on CIE 1976 (83%) and CIE1931 (72%) test standards.

Resolution Specifications

Model number		Dell E1910H Flat Panel Monitor
Scan range
•	Horizontal	30 kHz to 83 kHz (automatic)
•	Vertical	56 Hz to 75 Hz (automatic)
Maximum preset resolution		1366 x 768 at 60 Hz

Electrical Specifications

Model number	Dell E1910H Flat Panel Monitor
Video input signals	Analog RGB: 0.7 Volts +/-5%, 75 ohm input
	impedance
	Separate horizontal and vertical
Synchronization input signals	synchronizations, polarity-free TTL level, SOG
	(Composite SYNC on green)
AC input voltage / frequency / current	100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush current	120V:30A (Max.)
	240V:60A (Max.)