Dell E198FP appendix Power Management Modes, Pin Assignments, Vesa

Temperature:

Operating

Nonoperating

Humidity:

Operating

Nonoperating

Altitude:

Operating

Nonoperating

Thermal dissipation

5¢X to 35¢XC (41¢X to 95¢XF)

Storage: 0¢X to 60¢XC (32¢X to 140¢XF)

Shipping: -20¢X to 60¢XC(-4¢X to 140¢XF)

10% to 80% (noncondensing)

Storage: 5% to 90% (noncondensing)

Shipping: 5% to 90%(noncondensing)

3,657.6 m (12,000 ft) max

12,192 m (40,000 ft) max

138.44BTU/hour (maximum)

129.92BTU/hour (typical)

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:

VESA	Horizontal	Vertical	Video	Power	Power Consumption
Modes	Sync	Sync		Indicator
Normal	Active	Active	Active	Green	40.6 W (maximum)*
operation					38.1 W (normal)**
Active-off	Inactive	Inactive	Blanked	Amber	Less than 2 W
mode
Switch off	-	-	-	Off	Less than 1 W
					* With Audio
					** Without Audio

NOTE: The OSD functions only in the 'normal operation' mode. Otherwise one of the following messages appears depending upon the selected input.

In Power Save Mode

Press computer power button

or any key on keyboard or move mouse

Activate the computer and wake up the monitor to gain access to the OSD.

Pin Assignments

VGA Connector

Pin Number

1

2

3

4

5

6

7

8

9

15-pin Side of the Connected Signal Cable

Video-Red

Video-Green

Video-Blue

GND

Self-test

GND-R

GND-G

GND-B

Computer 5V/3.3V