Dell Official Manual for E2009W, E2209W, E2209WF Monitors

Page 15

D

OK / Input Source

Select

Use this button to select the input source or select an OSD menu option.

Use the Input source button to select one of the two different video signals that may be connected to your monitor:

VGA input

DVI-D input

If both VGA and DVI cables are connected to one Computer, this monitor displays an image automatically as long as a video signal is present in either VGA or DVI outputs. On a display connected to two Computers, set equal time for both screen savers. The video input from the movement of the first mouse will activate the display.

As you cycle through the inputs, the following messages appear to indicate currently selected input source. It may take 1 or 2 seconds for the image to appear.

or

or

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.

or

E

Use the Power button to turn the monitor on and off.

The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

Power button (with power light indicator)

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1.Push the MENU button to launch the OSD menu and display the main menu.

Main Menu for Analog (VGA) Input

Image 15
Contents Dell E2009W/E2209W Flat Panel Monitor Users Guide About Your Monitor Package ContentsBack View Front ViewBottom View Side ViewResolution Specifications Flat Panel SpecificationsVideo Supported Modes Preset Display ModesElectrical Specifications Physical CharacteristicsEnvironmental Characteristics Power Management ModesPin Assignments DVI Connector LCD Monitor Quality and Pixel Policy Cleaning Your MonitorAttaching the Stand Connecting Your MonitorAttaching the Soundbaroptional Organizing the CablesRemoving the Stand Wall Mounting Optional OSD Menu Using the Front Panel ControlsAuto Adjust Front panel Button DescriptionOK / Input Source Select Using the On-Screen Display OSD MenuAccessing the Menu System Power button with power light indicatorIcon Menu Main Menu for Digital DVI-D InputPush SubmenusColor Settings Input Color Format Mode Selection Preset ModeDisplay Settings Other Settings Reset all OSD settings to the factory preset values OSD Warning Messages Setting the Optimal ResolutionUsing the Tilt Using the Dell Soundbar OptionalYou can tilt the monitor to best fit your viewing needs Troubleshooting Your Monitor Built-in DiagnosticsCommon Problems Malfunctions Reset the monitor to Factory Settings On & off Product Specific ProblemsSpecific Symptoms What You Experience Appendix