• | Storage: | ||
|
| Shipping: | |
|
| ||
Humidity |
| ||
• | Operating | 10% to 80% | |
• | Storage: 5% to 90% | ||
|
| Shipping: 5% to | |
|
| ||
Altitude |
| ||
• | Operating | 3,657.6m (12,000 ft) max | |
• | 12,192m (40,000 ft) max | ||
|
|
| |
Thermal dissipation | 71.82 BTU/hour (maximum) | ||
64.98 BTU/hour (typical) | |||
|
| ||
|
|
| |
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered norma and within competitive standards. For more information, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
•To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special
•Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
•If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
•Handle your monitor with care as a
•To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page