About Your Monitor: Dell E1913S/E1913/E2213 Monitor User's Guide
Temperature
Operating
Humidity
Operating
Altitude
Operating
Thermal dissipation
0 ° C to 40 ° C (32 ° F to 104 ° F)
Storage:
Shipping:
10 % to 80 %
Storage: 5 % to 90 %
Shipping: 5 % to 90 %
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
78.48BTU/hour (maximum)
61.42BTU/hour (typical)
0 ° C to 40 ° C (32 ° F to 104 ° F)
Storage:
Shipping:
10 % to 80 %
Storage: 5 % to 90 %
Shipping: 5 % to 90 %
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
78.48BTU/hour (maximum)
61.42BTU/hour (typical)
0 ° C to 40 ° C (32 ° F to 104 ° F)
Storage:
Shipping:
10 % to 80 %
Storage: 5 % to 90 %
Shipping: 5 % to 90 %
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
81.89BTU/hour (maximum)
64.83BTU/hour (typical)
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot". Wh en the pixel remains black, it is known as a "dark dot".
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special
Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as a
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use. Back to Contents Page