Dell P170s appendix Using the On-Screen Display OSD Menu, Brightness/Contrast

Operating the Monitor:Dell P170S/P190S Flat Panel Monitor User's Guide

or

The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using the OSD Menu.

OSD menu / select

Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.

Down (-) and Up (+)

Use this button to launch Brightness/Contrast Menu.

Brightness/Contrast

Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the monitor self-adjusts to the current input:

Auto Adjust

Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

Use the power button to turn the monitor on and off.

The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.

Power Button and

Indicator

Using the On-Screen Display (OSD) Menu

file:///S/SSA_Proposal/P170S_P190S/UG/operate.htm[7/8/2011 4:48:31 PM]