Atlantic Technology IWTS-28 SUB instruction manual To Connect as a Powered Subwoofer

Page 4

4

Connections

IWTS-28 SUB In-Wall Subwoofer

Connecting the IWTS-28 SUB to Your System

The IWTS-28 SUB may be used as a passive bass module to reinforce the bass from the left/right front speakers in your system,or it may be powered by an external amplifier (such as Atlantic’s SA-180 mono bloc amplifier).

To Connect as a Powered Subwoofer:

Leaving the jumpers in place,connect the speaker wires from the SA-180 to one black terminal and one red terminal on the 28 SUB. Make sure the 28 SUB’s front-panel low-pass switch is in the off position (see fig. 3).

Figure 3 – IWTS-28 SUB jumpers

To Connect as a Passive Bass Module:

Remove the jumpers from the 28 SUB’s terminals (see fig. 4). Run speaker wires from the receiver’s front left speaker terminals to one set of termi- nals on the 28 SUB. Run another set to the other set of terminals on the 28 SUB. (see fig. 5) It does not matter which woofer on the 28 SUB is con- sidered‘right’ or‘left,’ since bass is generally recorded in mono, and is non- directional anyway. Be careful to observe consistent polarity between the two woofers,and between the woofers and front L/R speakers.All reds and blacks should be consistent.

Be sure to switch the 28 SUB’s front panel low-pass switch to“on.” This will filter out any signal above around 200 Hz from reaching the 28 SUB module, and ensures that only the non-directional lower frequencies are being fed to the SUB, thus preserving your system’s front-channel sonic imaging.

Important note: Each individual woofer in the 28 SUB is 8 ohms; when connecting them in parallel with your front L/R speakers (as you do when using the 28 SUB passively), the front L/R speakers need to also be 8 ohms minimum, so that their combined paralleled imped- ance does not fall below 4 ohms. Consult your receiver’s owner’s manual for more information on its impedance drive capability.

Figure 4 – Removing the IWTS-28 SUB jumpers

Figure 5 – Connecting as a Passive Bass Module

LEFT RIGHT SURROUND SURROUND + – + –

+ –

+ –

+ –

LEFT

CENTER

RIGHT

Image 4
Contents IWTS-28 SUB Important Considerations Before Installation Table of ContentsFor Future Reference Asymmetrical Placement Location ConsiderationsTo Connect as a Powered Subwoofer To Connect as a Passive Bass ModuleInstallation of the IWTS-28 SUB in New Construction Installation of the IWTS-28 SUB in Existing ConstructionRemoving and Installing the Grille Mounting the IWTS-28 SUBInstalling the Mounting Frame Painting the Speaker AssemblySpeaker Connection and Assembly Cutting the OpeningSpecifications Installing the Speaker Assembly into the FrameFront Panel Controls Low-Pass Control015-1028

IWTS-28 SUB specifications

The Atlantic Technology IWTS-28 SUB is a remarkable in-wall subwoofer designed to deliver high-quality bass performance while seamlessly integrating into your home’s decor. This innovative piece of audio equipment is ideal for those who desire a premium listening experience without the bulk of traditional subwoofers.

One of the main features of the IWTS-28 SUB is its advanced design, allowing it to be installed within the walls of your home. This space-saving installation not only helps to keep the area clutter-free but also enhances the sound performance by utilizing the wall cavity for an immersive bass experience. The IWTS-28 SUB has a robust 8-inch cone woofer, coupled with a high-efficiency motor structure. This combination ensures that it produces deep, powerful bass tones that can fill a room without distortion, even at high volume levels.

Another key characteristic of the IWTS-28 SUB is its frequency response. The subwoofer operates within a frequency range of 30Hz to 200Hz, allowing it to reproduce the low-frequency sounds that are often essential for a full home theater experience. This low-end capability ensures that movie soundtracks and music have the depth and richness that truly captivates listeners.

The IWTS-28 SUB is also equipped with advanced technologies such as a built-in high-pass filter and an advanced cabinet design, which minimizes resonance and unwanted vibration. This means that you can enjoy clear and precise audio that brings your entertainment to life. Additionally, it features a paintable magnetic grille, providing aesthetic flexibility to match your home’s interior design.

In terms of installation, the IWTS-28 SUB is user-friendly, with a straightforward setup process that makes it accessible for both professional installers and DIY enthusiasts. The product comes with mounting brackets and provides clear instructions, ensuring a secure and hassle-free installation experience.

Overall, the Atlantic Technology IWTS-28 SUB is an exceptional choice for anyone looking to enhance their audio system. With its powerful performance, innovative design, and ease of installation, it represents a perfect blend of technology and style, making it an excellent addition to any home theater or audio setup.