ITC-100 Tally Input - Pin Cross Reference
If you are using the
Contact closure between the relevant Pin number and ground will illuminate the LED. For example on Tally A, if Pin 1 is connected to Pin 4 the RED LED will light up on Channel 1; if Pin 13 is connected to Pin 4 the AMBER LED will light up on Channel 3
Tally A Input
The Tally A Input will send Tally Information to Channels 1 ~ 4. The following table shows the pin numbers for each channel:
Video | Red LED | Amber LED | |
LIVE | CUED | ||
Channel | |||
(On Air) | (Next) | ||
| |||
1 | Pin 1 | Pin 3 | |
|
|
| |
2 | Pin 6 | Pin 8 | |
3 | Pin 11 | Pin 13 | |
|
|
| |
AUX 1 | Pin 5 | Pin 15 | |
|
|
|
Pins 4, 9 and 14 can be used as ground.
Tally B Input
The Tally B Input will send Tally Information to Channels 5 ~ 8. The following table shows the pin numbers for each channel:
Video | Red LED | Amber LED | |
LIVE | CUED | ||
Channel | |||
(On Air) | (Next) | ||
| |||
4 | Pin 1 | Pin 3 | |
|
|
| |
5 | Pin 6 | Pin 8 | |
|
|
| |
6 | Pin 11 | Pin 13 | |
|
|
| |
AUX 2 | Pin 5 | Pin 15 |
Pins 4, 9 and 14 can be used as ground.
10